Meet us at Las Vegas Convention Center from 31.01. - 02.02 at IBS tradeshow: Booth SU771

Free sample shipping (USA)
100% natural stone surface
Over 70 decors available
The original since 2002

Protection products

Ensure the visual brilliance and longevity of your Slate-Lite stone veneers and protect the 100% natural stone surface with our accessory products specially designed for Slate-Lite.

2K-Sealer furniture
Slate-Lite 2K-Protection Furniture is a two-component, abrasion-resistant protective seal based on a polyurethane combination. Mix the two components in a 4:1 ratio. Leave to stand for approx. 10 min after mixing. Then apply evenly and full with a nylon roller. Allow to dry.ATTENTION: There is a stronger darkening of the material! Do not use in standing water boddies or surfaces.Easy cleaningSmooth surfaceIntensifies the colours of the materialShort drying timeContent: 21,1fl.ozConsumption: approx. 100-250g/m2 per coatSuitable for: FurnitureResilience: HighColor change: HighSuitable for wet areas, but not for standing waterDownload: Data SheetDownload: Safety Data Sheet (Sealer)Download: Safety Data Sheet (Hardener)

Available in 15 days

Slate-Lite Extreme Protection
Slate-Lite Extreme Protection is a two-component protective sealer with previous primer for the highest loads in various applications. The sealer is suitable for walls and floors indoors as well as for wet areas and reliably protects the stone surface of Slate-Lite against soiling. The surface to be processed must be clean, dry and free of dust and grease. First apply the primer with a foam roller in a crisscross pattern. Be careful not to apply too much pressure to avoid the formation of bubbles. Allow the primer to dry for at least 3 hours. Mix the two components in the specified ratio of 5:1. Apply the mixed product evenly with a foam roller. Again, apply only light pressure, otherwise white bubbles may appear. Allow to dry for a sufficiently long time. Clean equipment with water immediately after use.Multiple applications increase the protective effect.Easy cleaningSmooth surfaceNo to slight color deepeningConsumption: approx. 0,026-0,030 lbs/sq.ft per coatSuitable for: Walls, shower & bathResistance: Highminimum 1 coat: surfaces with low load, wet areas in shower & bathMin. 2-fold application: surfaces with high load such as tile backsplash in kitchensSuitable for wet areas, but not for standing waterDownload: Datasheet

Available, Ready for dispatch in 2 days

Special Impregnator 33.8 fl.oz.
Slate-Lite Special Impregnator is an effective protection against oil, grease and water stains. The impregnation does not contain solvents, it is water-based. No solventsWater and oil repellentImproved care characteristicsEasy application with a rollerRenew every 4-5 yearsContent: 33.8 fl.oz.Yield: approx. 323 sq.ft. per Bottle (with 2 time application)Suitable for: WallsResilience: LowColor change: LowDownload: Safety Data Sheet

Available, Ready for dispatch in 2 days